PS – Performance Sport Fluor-Free glide wax series are great gliders for training and competition with good glide properties. Replaces the CH wax line. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. PS waxes can be used as race wax alone or as a base for top coats.
PS5: Temperature: Air -10°C to -18°C (14°F to 0°F) The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. Recommended iron temp: 150°C (311°F)
PS6: Temperature: Air -6°C to -12°C (21°F to 10°F) PS6 is very versatile. Its area of use stretches from base for powder to racing wax and base prep wax for cold skis. PS6 has a good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. Recommended iron temp: 145°C (293°F)
PS7: Temperature: Air -2°C to -8°C (28°F to 18°F) PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. PS7 is an economic training and racing wax as well as an all round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. Recommended iron temp: 140°C (284°F)
PS8: Temperature: Air -4°C to +4°C (25°F to 39°F) PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. Recommended iron temp: 130°C (266°F)
PS10: Temperature: Air 0°C to +10°C (32°F to 50°F) PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. Recommended iron temp: 120°C (248°F)
PS Polar: Temperature: Air -14°C/-32°C (7°F to -26°F) A wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. In the warmer part of the temperature range, and when high air humidity, a powder or other top coat product will increase the performance. Recommended iron temp: 155°C (311°F)
